THE reference for power system transients

FFT spectrum scope for analysis of harmonics

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 31 July 2025 at 11h39 #6714
    anonymous
    Keymaster

    Hello there,

    Is there any way to see through a scope the FFT spectrum of a certain signal?

    Thank you,

    Renan

    Renan Morais Furlaneto | MPhil Candidate

    Department of Electrical Engineering

    The Hong Kong Polytechnic Univesity

    Hong Kong SAR

    31 July 2025 at 11h39 #6716
    anonymous
    Keymaster

    Hi,

    Yes, you can use scopeview for plotting the FFT Analysis.

     

    Please follow the procedure:

    1. go to “”View””–> Advance Function Editor in scopeview.

    2. Select “”Category”” –> Harmonic Analysis 

    3. Select “”Function”” –> Discrete Fourier Analysis

    4. Select signals which you need to perform the FFT analysis.

    5. Click “”Add Function””

     

    Thanks

    Regards

    Boopathi

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.