In this tutorial, we will create a subcircuit with bundle pins to connect a whole set of control signals. 1. Isolate the part of the EMTP model that will make the subcircuit. A subcircuit needs to have special symbols called “Port Connectors” which indicate which signals in the subcircuit are
In this tutorial, we will create add a new pin to an existing subcircuit. The initial subcircuit consists two pins connected through a resistor. 1. Go to “Subcircuit” section in “Options” tab and click to “new Port Connector”. 2. In “Port Name”, write “new_pin” and click on “Place”. 3. Connect
In this tutorial section we will look at how to use hierarchy to simplify the representation of complex designs. Using this feature, a symbol on a top-level circuit can itself represent a subcircuit of any desired size or complexity. Isolate the part of the EMTP model that will make the
EMTP provides the option to protect a subcircuit using a user password. When a device is given password protection then it becomes necessary to enter the password when accessing the device from a library, accessing its contents or trying to edit its symbol. When the user enters the password once
