HVDC-VSC Systems Training - USA
2025-05-19
HVDC-VSC Systems Training
Objectives
The objective of the training is to present a technical hands-on on HVDC-VSC systems.
It is organized in collaboration with RTE International.
The training covers the following topics:
Introduction to Power Systems
Introduction to VSC-MMC technology
Modeling and simulation of HVDC-VSC systems with EMTP®
VSC-MMC station control and protection
Introduction to DC cable technology
HVDC-VSC project specifications
Maintenance of HVDC converters
This course presents practical and technical information on HVDC-VSC systems.
EMTP® will be used to illustrate concepts and performances of HVDC-VSC systems.
Training structure
The duration is 5 days.
The training starts at 9:00 am and ends at 5:00 pm every day.
Lunch breaks (included in the course fee) are from 12:00 pm to 1:00 pm.
Intended audience
This course is designed for engineers, researchers, and students with a keen interest in HVDC systems.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Program
Day 1: Introduction and HVDC Technology Basics

Overview of HVDC technology – evolution, key drivers and challenges
HVDC MMC station main equipment description
HVDC connection requirements overview & HVDC system applications
Basics of Power Electronics in EMT – Introduction to EMTP®

Day 2: Project Management and Specifications of HVDC Projects

Basic Design approach
Tender Principles
Technical Specification
Project Execution

Day 3: HVDC Converter Design and EMT Studies

Introduction to HV cable technology
Cable systems in HVDC projects
Installation, operation, maintenance, and monitoring
HVDC converter design principles
Introduction to HVDC control and architecture
General description of VSC controls
Specific upper-level and low-level controls for MMC converters

Day 4: HVDC-VSC Design Studies and Convtrol & Protection Aspects

HVDC system design studies
General overview of converter protection strategy and implementation in real systems
HVDC-VSC behaviour during AC fault events
DC side transients analysis of typical DC faults
Introduction to transients during start-up and shut-down sequences

Day 5: Maintenance of HVDC-VSC systems and integration in AC grids

Introduction to the maintenance principles of HVDC-VSC systems
Maintenance of HVDC-VSC converter stations, focus on HVDC specifics
Introduction to practical experiences using replica
Maintenance specifications, spare parts, experiences and recommendations
Real Time Simulation Studies Introductions
Specific upper-level and low-level controls for MMC converters

General conditions
RTE International conditions apply. The number of participants from each compny is limited to ensure a diversity of participants.
**************
}

EMT Modeling & Simulation - Colombia
2025-05-27
Overview
This training will be help in Spanish.
This 2-day training session is designed to introduce participants to the fundamentals of electromagnetic transients (EMT) modeling and simulation using EMTP®. It combines theoretical concepts with practical, hands-on exercises to build a strong foundation in power system analysis and simulation techniques.
Training structure
The duration is 2 days.
The training starts at 8:30 am and ends at 4:30 pm every day.
Lunch breaks (included in the course fee) are from 12:30 pm to 1:30 pm.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Program
Day 1: Tuesday, May 27, 2025

Introduction to EMTP®
Theoretical background on power systems and transients; analysis methods
The range of problems and frequencies: lightning, switching, and temporary phenomena
Numerical methods for the simulation of transients
Initialization methods of EMTP®
Time-domain simulation options of EMTP®
Scopes and visualization options
Overview of EMTP® components: power and control devices
Creation and maintenance of subnetworks with masking
Building basic test cases

Day 2: Wednesday, May 28, 2025

Transformer models
Transmission line models: from basic to advanced
Load-flow and steady-state solution in EMTP®
Frequency scan option of EMTP®
Synchronous machine and controls
Wind and solar park modeling
Integration of DLLs in EMTP® using the IEEE/CIGRE B4.82 wrapper

**************
}
May 27-28, 2025

2025 EMTP International User Conference
2025-06-08

IPST 2025
2025-06-08

IEEE PES GM 2025
2025-07-27

Hospitality Suite
2025-07-28

Get Started with EMTP - Online
2025-09-02
Overview
This training will be held in English.
This course is designed to help participants gain a solid foundation in electromagnetic transient (EMT) simulation using EMTP®. By the end of the training, participants will be able to:

Understand the fundamentals of EMT simulation

Create and configure circuits in EMTP®

Simulate and visualize waveforms

Model key power system components

No prior experience is required – the course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.
Training structure
The training lasts for 3 days, running daily from 9:00 a.m. to 12:00 p.m. The sessions will be conducted in English.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.
Ticket types
Regular Ticket (Full Admission)
Includes a temporary EMTP® license, access to live Q&A, and participation in small hands-on labs with personalized support. Ideal for those who want to actively practice during the training.
Listener Ticket (Listen Only)
Grants full access to all presentations and sessions but excludes EMTP® licenses and lab participation. Best for those who prefer to focus on listening only.
Program
Day 1: Tuesday, September 2, 2025

Introduction to EMTP®
Theoretical background on power systems and transients; analysis methods
The range of problems and frequencies: lightning, switching, and temporary overvoltages; electromechanical transients
Numerical methods for the simulation of transients
Initialization methods of EMTP®

Day 2: Wednesday, September 3, 2025

Time-domain simulation options of EMTP®
Scopes and visualization options
Overview of EMTP® components: power and control devices
Creation and maintenance of subnetworks with masking
Building basic test cases

Day 3: Thursday, September 4, 2025

Transformer models
Transmission line models: from basic to advanced
Load-flow, Steady-state solution of EMTP®
Frequency scan option of EMTP®

**************
}
September 2-4, 2025

IBR Models Verification & Compliance for Power Systems - Online
2025-09-15
Overview
This training will be held in English.
This course is designed to deepen your expertise in EMT Inverter-Based Resource (IBR) models using EMTP®. By the end of the training, participants will be able to:

Understand EMT IBR models

Build EMT IBR models effectively

Choose the appropriate model for specific studies

Verify the quality and conformity of IBR models

Perform key EMT studies, including:
– LVRT / HVRT
– Temporary Overvoltages
– Switching
– Stability
– Sub-Synchronous Control Interaction (SSCI)

This course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.
Training structure
The training lasts for 5 days, running daily from 9:00 a.m. to 12:00 p.m., except for the last day, which ends at 11:00 a.m. The sessions will be conducted in English.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.
Ticket types
Regular Ticket (Full Admission)
Includes a temporary EMTP® license, access to live Q&A, and participation in small hands-on labs with personalized support. Ideal for those who want to actively practice during the training.
Listener Ticket (Listen Only)
Grants full access to all presentations and sessions but excludes EMTP® licenses and lab participation. Best for those who prefer to focus on listening only.
Program
Day 1: Monday, September 15, 2025 | 9:00 a.m. – 12:00 p.m.
– Wind-park and Photovoltaic Park Modeling in EMT-type Tools

WECC representation
Grid-Forming converter

Day 2: Tuesday, September 16, 2025 | 9:00 a.m. – 12:00 p.m.
– Renewable Energy Integration Studies

Load-flow and steady-state
Reference step-changes
LVRT/HVRT assessment
Transient immunity assessment

Day 3: Wednesday, September 17, 2025 | 9:00 a.m. – 12:00 p.m.
– Renewable Energy Integration Studies

Harmonic analysis
Transformer energization
Temporary overvoltages
Sub-synchronous Control Interaction (SSCI)

Day 4: Thursday, September 18, 2025 | 9:00 a.m. – 12:00 p.m.
– Automated Model Quality Test (MQT) and Conformity Assessment of Inverter-Based Resources with E-Interconnect
Day 5: Friday, September 19, 2025 | 9:00 a.m. – 11:00 a.m.
– Questions & Answers
**************
}
September 15 – 19, 2025

Switching & Lightning Transients - Online
2025-09-22
Overview
This training will be held in English.
This course is designed to provide a deep understanding of switching and lightning transient phenomena using EMTP®. By the end of the training, participants will be able to:

Understand switching and lightning transient phenomena

Identify the challenges involved in transient studies

Gather and interpret the necessary data for transient studies

Perform insulation coordination studies covering switching and lightning

This course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.
Training structure
The training lasts for 4 days, running daily from 9:00 a.m. to 12:00 p.m., except for the first and last days, which end at 11:00 a.m. The sessions will be conducted in English.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.
Ticket types
Regular Ticket (Full Admission)
Includes a temporary EMTP® license, access to live Q&A, and participation in small hands-on labs with personalized support. Ideal for those who want to actively practice during the training.
Listener Ticket (Listen Only)
Grants full access to all presentations and sessions but excludes EMTP® licenses and lab participation. Best for those who prefer to focus on listening only.
Program
Day 1: Monday, September 22, 2025 | 9:00 a.m. – 11:00 a.m.
– Insulation Coordination: Introduction

Origin and type of overvoltages
Design approach
Transients in networks – basics

Day 2: Tuesday, September 23, 2025 | 9:00 a.m. – 12:00 p.m.
– Slow-Front Overvoltage (Switching)

Approach
Modeling and simulation
Results interpretation

– Slow-Front Overvoltage (Switching)

Lab: Line re-energization
Controlled circuit-breaker

Day 3: Wednesday, September 24, 2025 | 9:00 a.m. – 12:00 p.m.
– Fast-Front Overvoltage (Lightning)

Definitions
Approach
Modeling and simulation
Results interpretation
Lab: lightning analysis

Day 4: Thursday, September 25, 2025 | 9:00 a.m. – 11:00 a.m.
– Questions & Answers
**************
}
September 22 – 25, 2025

Mastering EMTP: Advanced Online Training
2025-10-06
Overview
This training will be held in English.
This course is designed to help participants master advanced capabilities in EMTP® and leverage them for greater efficiency and customization. By the end of the training, participants will be able to:

Improve proficiency with EMTP®

Script and automate the graphical user interface

Create customized toolboxes

Integrate DLLs to extend EMTP’s functionality

Prior experience with EMTP is strongly recommended. The course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills for advanced workflows.
Training structure
The training lasts for 3 days, running daily from 9:00 a.m. to 12:00 p.m., except for the third day, which ends at 11:00 a.m. The sessions will be conducted in English.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.
Ticket types
Regular Ticket (Full Admission)
Includes a temporary EMTP® license, access to live Q&A, and participation in small hands-on labs with personalized support. Ideal for those who want to actively practice during the training.
Listener Ticket (Listen Only)
Grants full access to all presentations and sessions but excludes EMTP® licenses and lab participation. Best for those who prefer to focus on listening only.
Program
Day 1: Monday, October 6, 2025

Parallel computing
Parametric study

Day 2: Tuesday, October 7, 2025

Scripting with EMTP® (JavaScript, Python)- Modify a circuit
– Start a simulation
– Post process results

Day 3: Wednesday, October 8, 2025

Control DLL integration using CIGRE/IEEE standard DLL interface

**************
}
October 6 – 8, 2025

EMTP E-Interconnect
2025-11-26
2025-11-26

The ultimate tool for Automated Model Quality Test (MQT) and Conformity Assessment of IBR
Details
This webinar is a general presentation of the new E-interconnect tool.
This tool ensures your Inverter-Based Resource (IBR) model is interconnection-ready. It is an advanced automation module built in EMTPÂ®. Developed for Generation Owners (GOs), system operators (ISO, TSO), and consultants, E-Interconnect drastically simplifies the complex, time-consuming process of running Model Quality Tests (MQT) and conformity assessments required for grid connection.

Training: Get Started with EMTP - Beginners
2026-03-31
Overview
This training will be held in English.
This course is designed to help participants gain a solid foundation in electromagnetic transient (EMT) simulation using EMTP®. By the end of the training, participants will be able to:

Understand the fundamentals of EMT simulation

Create and configure circuits in EMTP®

Simulate and visualize waveforms

Model key power system components

No prior experience is required – the course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.
Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience

T&D electrical engineers
Consultants
Industry electrical engineers
Research personnel in industry, utilities, universities and consulting companies involved in power systems studies
Post-graduated students.

The course objectives are:

Understand the basics of EMT simulation
Know how to create a circuit in EMTP
Know how to simulate and visualize waveforms
Know how to model power system components

Program

Session 1– 31th of March – 9am to 12pm

Introduction to EMTP®
Theoretical backgrounds on Power Systems and Transients, analysis methods
The range of problems and frequencies: lightning, switching and temporary overvoltages; electromechanical transients
Numerical methods for the simulation of transients
Initialization methods of EMTP®

Session 2– 1st of April – 9am to 12pm

Time-domain simulation options of EMTP®
Scopes and visualisation options
Overview of EMTP® components: power and control devices
Creation and maintenance of subnetworks with masking
Building basic test cases

Session 3– 2nd of April – 9am to 12pm

Transformer models
Transmission line models: from basic to advanced
Load-flow, Steady-state solution of EMTP®
Frequency scan option of EMTP

IBR models verifications and compliances for bulk power-system integrations
2026-04-14
Overview
This training will be held in English.
The course objectives are:

To understand EMT IBR models
To know how to build EMT IBR models
To understand which model to use for what studies
To know how to verify the quality and the conformity of an IBR model
To know how to perform important EMT studies:

LVRT/HVRT
Temporary overvoltages
Switching
Stability
Sub-Synchronous Control Interaction (SSCI)

Training structure
The training lasts for 5 days, running daily from 9:00 a.m. to 12:00 p.m. The sessions will be conducted in English.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience

T&D electrical engineers
Consultants
Industry electrical engineers
Research personnel in industry, utilities, universities and consulting companies involved in power systems studies
Post-graduated students.

Program
Session 1– 14th of April – 9am to 12pm

Wind-park and Photovoltaic park modeling in EMT-type tools

WECC representation
Grid-Forming converter

Session 2 – 15th of April – 9am to 12pm

Renewable energy integration studies:

Load-flow and steady-state
Reference step-changes
LVRT/HVRT assessment
Transient Immunity assessment

Session 3 – 16th of April – 9am to 12pm

Renewable energy integration studies:

Harmonic analysis
Transformer energization
Temporary overvoltages
Sub-synchronous Control Interaction (SSCI)

Session 4 – 17th of April – 9am to 12pm

Automated Model Quality Test (MQT) and Conformity Assessment of Inverter-Based Resources with E-Interconnect

Session 5 – 18th of April – 10am to 12pm

Questions and answers

Mastering EMTP: Advanced Training
2026-04-28 - 2026-04-30
Overview
This training will be held in English.
This course is designed to help participants master advanced capabilities in EMTP® and leverage them for greater efficiency and customization. By the end of the training, participants will be able to:

Improve proficiency with EMTP®

Script and automate the graphical user interface

Create customized toolboxes

Integrate DLLs to extend EMTP’s functionality

Prior experience with EMTP is strongly recommended. The course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills for advanced workflows.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.

Program
Day 1: 28th of April, 2026

Parallel computing
Parametric study

Day 2: 29th of April, 2026

Scripting with EMTP® (JavaScript, Python)- Modify a circuit
– Start a simulation
– Post process results

Day 3: 30th of April, 2026

Control DLL integration using CIGRE/IEEE standard DLL interface

Training: Switching & Lightning Transients
2026-05-12 - 2026-05-15
Overview
This training will be held in English.
This course is designed to provide a deep understanding of switching and lightning transient phenomena using EMTP®. By the end of the training, participants will be able to:

Understand switching and lightning transient phenomena

Understand the challenges around transient studies

Know the data required for transient studies and where to find typical data

Know the main steps to perform an insulation coordination study (switching, lightning, TRV)

Know how to interpret the results provided by EMT-type software.

This course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.

Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.

Program
Session 1– 12th of May – 10am to 12pm
– Insulation Coordination: Introduction

Origin and type of overvoltages
Design approach
Transients in networks – basics

Session 2 – 13th of May – 9am to 12pm
– Slow-Front Overvoltage (Switching)

Approach
Modeling and simulation
Results interpretation

– Switching analysis with EMTP

Lab: Line re-energization
Controlled circuit-breaker

Session 3 – 14th of May – 9am to 12pm
– Fast-Front Overvoltage (Lightning)

Definitions
Approach
Modeling and simulation
Results interpretation
Lab: lightning analysis

Session 4 – 15th of May – 10am to 12pm
– Questions & Answers

EMTP® International User Conference in Montreal, 2026
2026-07-19 09:00 - 2026-07-23 17:00 (America/New_York)
Join us at the EMTP® International User Conference in Montreal, Canada on July 19, 2026. Call for Speakers Send your application by May 15, 2026

Training: Get Started with EMTP - Beginners
2026-08-03 - 2026-08-04
Overview
This training will be held in English.
This course is designed to help participants gain a solid foundation in electromagnetic transient (EMT) simulation using EMTP®. By the end of the training, participants will be able to:

Understand the fundamentals of EMT simulation

Know how to create a circuit in EMTP

Know how to simulate and visualize waveforms

Know how to model power system components

No prior experience is required – the course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.

Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.

Program
Session 1– 3rd of August – 9am to 12pm

Introduction to EMTP®
Theoretical background on power systems and transients; analysis methods
The range of problems and frequencies: lightning, switching, and temporary overvoltages; electromechanical transients
Numerical methods for the simulation of transients
Initialization methods of EMTP®

Session 2– 4th of August– 9am to 12pm

Time-domain simulation options of EMTP®
Scopes and visualization options
Overview of EMTP® components: power and control devices
Creation and maintenance of subnetworks with masking
Building basic test cases

EMTP® International User Conference in Paris, 2026
2026-08-26 18:30 - 21:00 (Europe/Paris)
Join us at the EMTP® International User Conference in Paris, France on August 26. 2026. Call for Speakers Send your application by May 31, 2026

Get started with EMTP® - Beginners
2026-09-15 - 2026-09-16
Overview
This training will be held in English.
This course is designed to help participants gain a solid foundation in electromagnetic transient (EMT) simulation using EMTP®. By the end of the training, participants will be able to:

Understand the fundamentals of EMT simulation

Training: Get Started with EMTP

Know how to simulate and visualize waveforms

Know how to model power system components

No prior experience is required – the course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.

Training structure
The training lasts for 3 days, running daily from 9:00 a.m. to 12:00 p.m. The sessions will be conducted in English.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.

Program
Session 1– 15th of September – 9am to 12pm

Introduction to EMTP®
Theoretical background on power systems and transients; analysis methods
The range of problems and frequencies: lightning, switching, and temporary overvoltages; electromechanical transients
Numerical methods for the simulation of transients
Initialization methods of EMTP®

Session 2– 16th of September – 9am to 12pm

Time-domain simulation options of EMTP®
Scopes and visualization options
Overview of EMTP® components: power and control devices
Creation and maintenance of subnetworks with masking
Building basic test cases

Mastering EMTP: Advanced Training
2026-10-13 - 2026-10-15
Overview
This training will be held in English.
This course is designed to help participants master advanced capabilities in EMTP® and leverage them for greater efficiency and customization. By the end of the training, participants will be able to:

Improve proficiency with EMTP®
Script and automate the graphical user interface
Create customized toolboxes
Integrate DLLs to extend EMTP’s functionality

Prior experience with EMTP is strongly recommended. The course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills for advanced workflows.

Training structure
The training lasts for 3 days, running daily from 9:00 a.m. to 12:00 p.m., except for the third day, which ends at 11:00 a.m. The sessions will be conducted in English.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.
Ticket types
Regular Ticket (Full Admission)
Includes a temporary EMTP® license, access to live Q&A, and participation in small hands-on labs with personalized support. Ideal for those who want to actively practice during the training.
Listener Ticket (Listen Only)
Grants full access to all presentations and sessions but excludes EMTP® licenses and lab participation. Best for those who prefer to focus on listening only.

Program
Day 1: Tuesday, October 13, 2026

Parallel computing
Parametric study

Day 2: Wednesday, October 14, 2026

Scripting with EMTP® (JavaScript, Python)- Modify a circuit
– Modify a circuit
– Start a simulation
– Post process results

Day 3: Thursday, October 15, 2026

Control DLL integration using CIGRE/IEEE standard DLL interface

IBR models verifications and compliances for bulk power-system integrations
2026-10-26 - 2026-10-29
Overview
This training will be held in English.
This course is designed to deepen your expertise in EMT Inverter-Based Resource (IBR) models using EMTP®. By the end of the training, participants will be able to:

To Understand EMT IBR models

To know how to build EMT IBR models

To understand which model to use for what studies

To know how to verify the quality and the conformity of an IBR model

To know how to perform important EMT studies:
– LVRT / HVRT
– Temporary Overvoltages
– Switching
– Stability
– Sub-Synchronous Control Interaction (SSCI)

This course includes hands-on exercises and guided examples to build both theoretical understanding and practical skills.

Training structure
The training lasts for 5 days, running daily from 9:00 a.m. to 12:00 p.m., except for the last day, which ends at 11:00 a.m. The sessions will be conducted in English.

Computer and temporary EMTP® licenses
Every participant is required to bring their own personal computer. Temporary EMTP® licenses will be provided to participants for the course’s duration.
Intended audience
This training is ideal for T&D electrical engineers, consultants, industry professionals, researchers, and post-graduate students involved in power system studies.

Program
Session 1– 26th of October – 9am to 12pm
– Wind-park and Photovoltaic Park Modeling in EMT-type Tools

WECC representation
Grid-Forming converter

Session 2 – 27th of October – 9am to 12pm
– Renewable Energy Integration Studies

Load-flow and steady-state
Reference step-changes
LVRT/HVRT assessment
Transient immunity assessment

Session 3 – 28th of October – 9am to 12pm
– Renewable Energy Integration Studies

Harmonic analysis
Transformer energization
Temporary overvoltages
Sub-synchronous Control Interaction (SSCI)

Session 4 – 29th of October– 9am to 12pm
– Automated Model Quality Test (MQT) and Conformity Assessment of Inverter-Based Resources with E-Interconnect
– Questions & Answers
