Insulation coordination analysis with EMTP
2019-09-13, 2019-12-11
**************

CIGRE Canada
2019-09-16
Date: 2019-09-16
Place: Québec , Canada
Booth number: 33

> Event website
> View all upcoming conferences

Analysis of transients in power systems
2019-09-23

MMC-HVDC modeling, simulation and analysis with EMTP
2019-10-28

Get started with EMTP | New Orleans
2019-12-02

Renewable energy: new module EMTP
2019-12-03

International Conference on Power Systems (ICPS)
2019-12-20
Date: 2019-12-20
Place: Rajasthan , India
Booth number: 25

> Event website
> View all upcoming conferences

EMTP: Renewable Energy Module
2020-02-26
2020-02-26

EMTP Basic e-Training
2020-04-16
Insulation coordination analysis with EMTP
Training objectives
The objective of this training is to get familiar with the usage of EMT-type software and the study of power-system transients. How to model power-systems, what scenarios to run and how to interpret and verify results are as many questions that will be addressed. The software EMTP is used for demonstrating concepts and teaching through practical cases. Prior experience with EMTP is not required.
Training structure
The duration of the training is 3 days.
The training starts at 10 am and ends at 6 pm every day. Lunch breaks are from 1.30 pm to 2 pm.
The training is presented in English.
Computer and temporary EMTP license
Each participant will have to bring a personal computer. EMTP temporary licenses will be provided for the duration of the course.
Program
Day 1: Basic

Presentation of EMTP
General Introduction
Introduction to the Graphical User Interface EMTPWorks

How to simulate a simple circuit?
Introduction to Scopeview & MPLOT

Practical exercises
Sub-circuit creation and hierarchical designs

Rotation exercises
Practical exercises

Day 2: Switching Transients
Introduction to EMTP models and applications

Transformer

Transformer energization

Line and cable modeling
Switching transients

Line Energization Analysis
Mitigation using Pre-inserted Resistor (PIR)
TRV analysis
Selection of BSL based on IEC 60071-1

Practical examples

Day 3: Lighting transients

Lightning transients

Introduction
System modelling for lightning analysis
Study of back flash over analysis
Study of shielding failure analysis
Selection of BIL based o IEC 60071-1

Practical examples

Contact for training information
PWSIM
Level 6, Chennai Citicentre,
10/11, Dr. Radhakrishnan Salai,
Chennai – 600004
INDIA
Email: s.kumar@pwsim.com
Phone: + 91 875 444 1139
General conditions
Participants will have to pay 100% in advance before the course.
Advance payment is required by Credit Card (*3% tax will apply on credit card payment) or by Bank wire Transfer.
Cancellation can be made according to PWSIM’ General Conditions for training:
In case you cannot attend the training after having registered, please contact us as soon as possible at s.kumar@pwsim.com
In case of cancellation three weeks or more before the beginning of the training, the participants will not be charged.
In case of cancellation less than three weeks before the beginning of the training, PWSIM will charge the participant 50% of the training fees.
Please note that PWSIM will not reimburse any travel and/or accommodation expenditure in case of cancellation of the training.
We recommend you to make your travel arrangements once the training is confirmed.
**************
https://www.emtp.com/events/trainings

HVDC EMT modeling, simulation and analysis
2020-05-11
2020-05-11

This course is an online training on EMT simulation of HVDC. It is composed of 5 webinars of 2 hours and 5 optional lab sessions of 2 hours.
This course presents practical and technical information on VSC-HVDC and LCC-HVDC systems based on real projects.
If attendees cannot make it to any of the Theory session, a recording of the course will be shared.

EMT simulation and Analysis of Large-Scale Power Systems with Renewables
2020-05-18
2020-05-18

This course is an online training on EMT simulation of renewables. It is composed of 2 webinars of 2h and 3 optional lab sessions of 2h.
The objective of this training is to present a short course on renewable source integration studies.
Learn on power system transients and to predict the outcome of transient events on power systems.
Temporary EMTP licenses will be provided to the lab audience.

HVDC-VSC systems training May 2020
2020-05-25
HVDC-VSC systems training May 2020
Learning objectives
The purpose of this training is to build and strengthen the technical and analytical capacityof the participants and therefore their respective institutions in the domain of HVDC VSC Systems.
The large-scale development of renewable energy sources in transmission grids, along with public demand to avoid construction of new overhead lines, has led to increased applications of long high-voltage underground cables, the addition of dynamic reactive power support, and new HVDC links using underground DC cables.The increasing penetration of power electronics-based devices in the network has a significant impact on grid performance and reliability. It requires improvements in control and protection systems and understanding of dynamic behaviour.Specific skills and tools are required to study these technologies.
Target audience & Required skills
This course is intended for engineers, researchers, operators and maintenance personnel, to provide up-to-date technical expertise for HVDC-VSC projects.
Training methodology
This training session will be interactive, including presentations from experts as well as case studies.
Training materials will be provided during the sessions.
Each participant will receive a temporary license of the simulation tool EMTP (www.emtp.com) valid during the training. It will be used to illustrate concepts presented during training. No prerequisites are required.
A tutorial will also be conducted in the real-time lab with HVDC VSC replicas to illustrate how Hardware In the Loop (HIL)simulation can support integration of HVDC in transmission grids.
Course fee
What is included in the price?

5-day training on HVDC-VSC Systems
Training materials
Lunch and coffee breaks
A networking dinner
Temporary license for the simulation tool EMTP

Schedule
Day 1 – Monday
Basics on HVDC -VSC technology for transmission grids | Trainers: P. Rault, S. Dennetière

Day 2 – Tuesday
HVDC VSC control and protection | Trainers: H. Saad, P. Rault
Day 3 – Wednesday
HVDC VSC project management | Trainers: J. Liger, M. Schudel
Day 4 – Thursday
Studies with HVDC VSC systems and HVDC cable technologies | Trainers: P. Rault, S. Dennetière, M. Henriksen
Day 5 – Friday
Maintenance of HVDC VSC systems and advanced studies | Trainers: S. Akkari, P. Rault, S. Dennetière, H. Saad
Get the brochure
Contact for training information
Oguz Ataoglu | Training Coordinator
Email: training@rte-international.com
Sebastien Dennetière | Trainer & HVDC Expert
Email: sebastien.dennetiere@rte-international.com
**************
https://powersys-solutions.com/documents/HVDC-VSC-SYSTEMS-training-brochure-2020.pdf

EMTP Basic e-Training
2020-05-28

EMTP Get Started - e-Training
2020-06-05
2020-06-05

RT20 Virtual Edition
2020-06-18
Date: 2020-06-18
Place: Virtual ,
Booth number: 16

> Event website
> View all upcoming conferences

PSCC
2020-06-29
Date: 2020-06-29
Place: Porto , Portugal
Booth number: 15

> Event website
> View all upcoming conferences

Insulation Coordination Analysis
2020-07-28
2020-07-28

The aim of this course is to develop the knowledge on transients in power system. Learn and enhance your skill on switching and lightning transients using EMTP Software. The real feel of simulating switching and lightning Transients in substations. The detailed investigations of selecting/optimizing equipment insulation levels.

2020 European EMTP User Conference
2020-08-27
Date: 2020-08-27
Place: Paris , France
Booth number: 13

> Event website
> View all upcoming conferences

Simulation and Analysis of Large-Scale Power Systems with Renewables
2020-09-14
Simulation and Analysis of Large-Scale Power Systems with Renewables
Course Overview
Learn on power system transients and to predict the outcome of transient events on power systems. Learn about EMTP and its unique capabilities for simulating complex power systems from load-flow to time-domain in the same simulation environment.
The attendees must bring their own laptop computers on which we will install the EMTP software for the duration of the course. The attendees will also receive a free 30-day limited access to the EMTP software. Prior experience with EMTP is not required. The attendees will master EMTP usage at the end of the course. The course will move from basic level concepts to advanced simulation methods and models. The topics include traditional power systems and power systems with renewable energy systems. Large-scale power system analysis methods in a unified environment are emphasized.
Who should attend?
The course will benefit to engineering personnel familiar with power systems and who need to get more in-depth knowledge on the simulation and analysis of power systems. The course will also benefit to researchers, professors and engineers with more advanced knowledge on power system transients.
Course fee
Fee covers morning and afternoon breaks, scheduled lunches and course materials. Registered University Students and Professors may receive a discount of 30%. The full amount should be paid before attending the course.
Cancellation Policy:
If you cannot attend, please notify us no later than three weeks before the course begins, and we will refund your fee. Cancellations received after this date and no-shows will not be refunded. You may enroll a substitute at any time before the course starts. If the course is cancelled by us, you will be notified at least two weeks before the course and fully refunded for the Course Fee.
Staying at location: Hotel suggestions will be provided to you on enrollment. Each participant must cover his/her travel and staying costs.
Course schedule
The duration is 5 days.
The course starts at 8:30 and ends at 16:30. Registration is on Monday at 8:00.

Computer and temporary EMTP license
Temporary EMTP licenses will be provided to the audience. The participants must bring their own computers.

Program
Day 1:

Introduction to the program

Welcoming remarks
The range of problems and frequencies: lightning, switching and temporary overvoltages; electromechanical transients

Theoretical backgrounds on Power Systems and Transients

Theoretical analysis methods
What you can expect to learn

EMTP Numerical methods for the simulation of transients

Load-flow, Steady-state, Automatic initialization
Frequency scan
Time-domain

Introduction to EMTP using examples (exercises conducted by participants)

Overview: devices, pins and signals, subnetworks, libraries
Power and Control devices
Device attributes
Basic scripting techniques
MPLOT and ScopeView

Basic models: switches, RLC branches, ideal sources
Capacitor bank switching example (exercises conducted by participants)
Ferroresonance
Multiphase power-flow (exercises conducted by participants)

Methodology and setup options
Initialization IEEE-34 bus distribution test case study
Techniques for studying large distribution grids

Day 2:

Simulation of control systems

Block diagrams, initialization
Measuring and interfacing devices
User-defined modeling

Switching device models

Simulation of power electronics devices
Power converters and switching devices

Transmission/Distribution line and cable models

Theory and available models
PI-section, Constant Parameter model, Frequency dependent models
Corona model
Application examples: various switching phenomena (exercises conducted by participants)

Synchronous and asynchronous machine models and related controls

Case setup, controls and automatic initialization
Exciters and Governors with automatic initialization from load-flow solution
Startup from 0 Hz option

Studying complete systems with high-level modules and efficiency (exercises conducted by participants)

Easy transition from load-flow to steady-state to time-domain
Switching transients
Temporary overvoltages
TRV study tool

Day 3:

Analysis of a 500 kV and 230 kV grids (long exercises conducted by participants)

Complete system setup
Load-flow solution, automatic initialization
Electromechanical and electromagnetic studies

Simulation of large grids with conventional generation

T0-grid case
Fast computation

Usage of frequency dependent network equivalents
Protection systems

Library of protection devices
Integration of line protection relays into 500 kV system
Overcurrent protection
Distance protection
Power swing

Day 4:

Wind park models

Detailed and average value versions
Control and Protection systems
Initialization
Validation

Photovoltaic (PV) models

Detailed and average value versions
Control and Protection systems
Initialization

Integration of renewables in large scale grids

PV and Wind park integration
Subsynchronous control interaction studies in realistic systems using impedance scanning techniques

Advanced topics

Fault location in complex networks based on Electromagnetic Time Reversal
Various demonstrations
User-defined modeling methods
Advanced programming with EMTP using scripts and various other methods
DLL based models

Day 5: Real-time simulations (Optional and included in the course fee)

Introduction to OPAL-RT real-time solutions

Introduction to HYPERSIM and OPAL-RT real-time suits
Compatibility between EMTP and HYPERSIM
Advantages of real-time simulation

Simulating distributed energy resources (DER) models in real-time simulation

Modeling photovoltaics (PVs), battery energy storage systems (BESS) and wind turbines (WTs)
Design of power electronics models with FPGA-based Power Electronics (eHS)

Cyber Physical Simulation (CPS) to ensure security of electric power grids

Challenges of cyber security testing in Industrial Control Systems (ICS) for power grids
Demonstration of a simulated cyber attack

Hardware-in-the-Loop (HIL) testing for power system protection

IEC 61850: Standard for communications in substations
Protection relay testing

Contact for training information
Frédérique PEYRET | Marketing Manager, EMTP Alliance
Email: marketing@emtp-software.com
Jean MAHSEREDJIAN, Ph.D, IEEE Fellow | Lead developer of EMTP
Email: jean@emtp.com
General conditions
Participants will have to pay 100% in advance before the course.
Advance payment is required by credit card or by Bank wire Transfer.
In case you cannot attend the training after having registered, please contact us as soon as possible at marketing@emtp-software.com
Under no circumstances the participants may request reimbursement of accommodation and travel expenditures.
We recommend you to make your travel arrangements once the training is confirmed.
**************
https://www.emtp.com/events/trainings

IEEE PES T&D 2020
2020-10-12
Date: 2020-10-12
Place: Chicago , USA McCormick Place South
Booth number: 9

> Event website
> View all upcoming conferences

Introduccion al Estudio de Transitorios en Sistemas Eléctricos con EMTP
2020-12-04
2020-12-04

EMTP – overview and HVDC simulation
2020-12-17
2020-12-17

Overview of EMTP capabilities and VLPT modeling
2020-12-17

TPEC Conference
2021-02-02
Date: 2021-02-02
Place: VIRTUAL , USA
Booth number: 322

> Event website
> View all upcoming conferences

Basic EMTP e-training
2021-02-10
2021-02-10

The objective of this training is to get familiar with the usage of EMT-type software and the study of power-system transients. How to model power-systems, what scenarios to run and how to interpret and verify results are as many questions that will be addressed. The software EMTP is used for demonstrating concepts and teaching through practical cases. Prior experience with EMTP is not required.

Analysis of Transients in Power Systems
2021-02-16
2021-02-16

ISGT
2021-02-16
Date: 2021-02-16
Place: VIRTUAL , USA
Booth number: 323

> Event website
> View all upcoming conferences

Transient immunity assessment of wind and solar parks
2021-03-25
2021-03-25
